notes

No matter how expensive your webcam is, it will never be as good as your old phone’s camera. In this guide, we will give a second life to your old phone by using it as a webcam. All software used in this guide is free.

Android phone

We will need to install the following software on your mobile phone:

1. IP Camera to stream video from your phone’s camera to your desktop computer over WiFi.
2. (Optional) droidVNC-NG VNC Server to control your phone remotely from your desktop computer.

Desktop computer

This guide is written for Fedora, but it should give you a general idea of how to set it up on other distributions.

We will need to install v4l2loopback to create a virtual camera device and ffmpeg to stream video from remote camera of the mobile phone to the virtual camera device.

v4l2loopback is a kernel module that allows you to create “virtual video devices”. It is available in rpmfusion repository.

1. Enable rpmfusion repository:

sudo dnf install https://mirrors.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm https://mirrors.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-$(rpm -E %fedora).noarch.rpm

2. Install dependencies:

sudo dnf install ffmpeg v4l2loopback akmod-v4l2loopback

3. Verify that v4l2loopback is loaded:

lsmod | grep v4l2loopback

4. If it is not loaded, run this command:

akmods --kernels $(uname -r) --rebuild
# Confirm that it was loaded
lsmod | grep v4l2loopback

Add the following helper function to your .bashrc file to start streaming from your phone:

webcam () {
  ffmpeg -i http://192.168.2."$1":4747/videofeed -vf format=yuv420p -f v4l2 /dev/video0
}

Assuming that your phone’s IP address is 192.168.2.38 and IP Camera is running on port 4747, you can start streaming by running webcam 38 in your terminal. I keep my phone’s IP assress dynamic as it changes once in a while, if I don’t use it for a long time.

Hardware setup

I have an old Google Pixel 3a phone which is mounted on the top of my monitor. The phone is attached to the mount with magnetic ring. At the time of writing, the setup cost me around 25 EUR:

• Itramax magnetic phone holder
• Simarro magnetic rings

How to use

1. On mobile phone, start IP Camera and select “Start server” from the menu. In the bottom part of the screen, you will see the IP address and port number.
2. On desktop, run the following command, providing the IP address of your phone and the port number:

ffmpeg -i http://192.168.2.26:4747/videofeed -vf format=yuv420p -f v4l2 /dev/video0
## or use the helper function
webcam 26

You can confgiure video resolution and other settings of your phone’s camera by navigating to http://192.168.2.26:4747/ in your browser.

If you install droidVNC-NG VNC Server, you can start IP Camera remotely from your desktop. This is useful if you want to start streaming from your phone without touching it. On the desktop computer, use Connections app (comes by default in GNOME) to connect to your phone.

Troubleshooting

If for some reason v4l2loopback module is not compiled correctly, you can compile it manually by following this instruction.

1. Install DroidCam on your phone. There are free and paid versions. Paid version enables HD quality
2. Install DroidCam in your desktop:

sudo dnf copr enable meeuw/droidcam
sudo dnf install droidcam

3. Launch both mobile and desktop applications. Connect desktop client to your phone’s camera (IP address and port are displayed on your phone). Desktop client will connect to your camera via WiFi and create a virtual camera device.

If droidcam doesn’t start with the following error:

$ droidcam
Fatal: droidcam video device reported pixel format 34524742 (BGR4), expected 32315559 (YU12/I420)
Try 'v4l2loopback-ctl set-caps "video/x-raw, format=I420, width=640, height=480" /dev/video<N>'

Run this command:

v4l2loopback-ctl set-caps /dev/video "YU12:640x480"